Rachelo Dumbrique                                                            

                                                                                    This e-mail address is being protected from spam bots, you need JavaScript enabled to view it

                                                                                  San Jose, CA   408.914.0189 

                                Objective: Seeking Quality Engineer position in Medical Device & Electronics

                                10 Years Quality Engineering & International Experience MS in Quality Assurance –

                  BS in Electronics EngineeringRisk Analysis * ISO 13485 * CAPA * Reliability * FMEA * SPC * MTBF * Six Sigma PROFESSIONAL

EXPERIENCE 

Analog Devices Inc., San Jose, CA, QUALITY OPERATIONS ENGINEER  2006 – 2009 Product: Semiconductors* Implemented root cause failure analysis and corrective and preventive actions (CAPA) with an average of 10 closed issues per month.

* Completed Design Failure Mode and Effects Analysis (DFMEA) to fulfill Production Part Approval Process (PPAP) that resulted to audits with zero deviation.

* Developed the Customer Issue Tracker, within a 6-month timeframe, with 80% reduction in open issues. Achieved the average target of three product releases per month.

* Reviewed customer drawings and specifications to ensure compliance with ISO standards.

* Provided documentation for customers, audits, training and data management.

Maxtor Corporation, Milpitas, CA, QUALITY & RELIABILITY ENGINEER  2006 Maxtor Peripherals, Pte. Ltd., Singapore, QUALITY & RELIABILITY ENGINEER  2002 – 2005Product: Hard Disk Drives 

* Led acoustic test setup and standard operating procedure (SOP) development, which improved performance and yield results up to 90%.

* Generated Pareto and p-charts, and used Weibull software to measure product reliability performance. Accurate reliability prediction earned 100% customer satisfaction.

* Reviewed and identified specification limits for desktop and server products under evaluation that includes the analysis of margin test data and degradation results on selected samples.

* Reviewed production build to determine appropriate test sample size and test duration for issue verification. Typically, 120 drives for temperature stress tests that run from 48 to 720 hours.

Astec Power, Inc., Philippines, QUALITY ASSURANCE ENGINEER  1999 - 2002 Product: Power Supplies 

* Implemented and trained procedures such as field Mean Time Between Failure (MTBF) calculation and Annualized Failure Rate (AFR) prediction for effective reliability measurement. 

* Performed product evaluation from prototype to production phase to guarantee product design quality and reliability. Includes electrical and thermal testing.

* Reviewed the qualification requirements for products under development for reliability test plan, schedule and completed quality assurance verification reports.

* Analyzed batch/routine RMA (Return of Materials Authorization) for accurate reliability assessment of new products. Achieved significant reduction in rework and testing time.  

EDUCATION

o    MS (August 2010 expected), Quality Assurance Engineering, San Jose State University, CAo    Diploma (1999), Electrical Engineering, Major in Power Electronics, University of the Philippines, Philippineso    BS (1997), Electronics and Communications Engineering, Mapua Institute of Technology, Philippines

CERTIFICATIONS / PROFESSIONAL DEVELOPMENT:

o    Member, American Society for Quality (ASQ)

o    Communications/Webmaster Officer, Society of Manufacturing Engineers (SME)

o    Member, Epsilon Pi Tau Honor Society, Rho Chapter San Jose State University

o    Certificate in Communicate to Influence Program for Communication and Leadership Excellence. Decker Communications Inc., San Jose, CA

o    Certificate in Core Tools Training (APQP, FMEA, Control Plan, PPAP, SPC, MSA). Omnex Inc., Ann Arbor, Michigan

o    Certificate in Powerful Presentations.  Beacon Consulting, Singapore

o    Licensure Exam Certificate in Electronics and Communications Engineering. Professional Regulation Commission, Philippines

o    Attended National Instrument’s Seminar on Medical Device Development from Concept to Approval (June 2009)

o    Attended Kalypso’s Web Conference on Beyond Compliance: Balancing Profitable Growth and Regulatory Compliance (July 2009)

o    Attended Pilgrim Software’s Web Seminar on Integrated Approach to Health Product Auditing (September 2009)